Groundwater Overview

Hydrologic Cycle
What is Groundwater?
Aquifers
Surface Water and Groundwater Interaction
Groundwater Recharge
Groundwater Discharge
Wells and How They Work
What is Sustainable Management?

Hydrologic Cycle

All water on the surface of the earth and underground are part of the hydrologic cycle (Figure 1), driven by natural processes that constantly transform water from liquid to solid or vapor and back to liquid while moving it from place to place.

Figure 1: The Hydrologic Cycle – The Earth contains a finite amount of water as is illustrated here, showing how the water moves, from the oceans by evaporation, falling as precipitation back to the land and moving through streams, into lakes and into the subsurface as groundwater.
Figure 1: Schematic of the Hydrologic Cycle, showing how water moves from the oceans by evaporation, falls as precipitation back to the land and moves through streams, into lakes and into the subsurface as groundwater.

Water evaporates from ponds, lakes, oceans, reservoirs, and soils. Plants take water from the ground and emit water vapor into the air called evapotranspiration. The water vapor forms clouds that eventually condense and return to the earth’s surface as precipitation such as fog, rain, sleet, or snow.

During storms, water runs off the surface into streams or water bodies or seeps into the ground. Water that sinks into soils or surface rock recharges groundwater reservoirs or aquifers.

Groundwater can discharge at seeps or springs, or into rivers, streams, lakes and oceans, or wells. In arid areas and during the summer, precipitation may first infiltrate into the ground, but much of it quickly returns to the cycle through evapotranspiration.

Back to top

What Is Groundwater?

Figure 2: Schematic showing the unsaturated and saturated zones, and the occurrence of groundwater in porous media (right bottom - alluvial sands and gravels), and fractured hard rock (left bottom). Fractures in hard rock typically range from a few millimeters to more than a centimeter.
Figure 2: Schematic showing the unsaturated and saturated zones, and the occurrence of groundwater in porous media (right bottom), and fractured hard rock (left bottom).

Water infiltrates and collects underground, and is held in an upper unsaturated zone and a lower saturated (“groundwater”) zone (Figure 2).

The unsaturated zone is located immediately beneath the land surface and above the water table, and the zone’s pore spaces contain both air and water. A well drilled into the unsaturated zone will not produce water.

Figure 3: Recharge of groundwater, groundwater flow and interconnection of surface water, showing wells completed in unconfined and confined aquifers.
Figure 3: Recharge of groundwater, groundwater flow and interconnection of surface water.

In the saturated zone all the open spaces are filled with groundwater. The top of the saturated zone is called the water table. The saturated zone supplies water to wells. Like surface water, groundwater flows from higher to lower levels, under the influence of gravity (Figure 3).

 

Back to top

Aquifers

An aquifer is a saturated zone of sediment or rock through which groundwater can move. Groundwater stored in aquifers can be pumped to the surface through wells to supply water for agriculture, homes and cities.

While aquifers may be thought of as underground reservoirs, storing water underground is more complex than in a surface reservoir. An aquifer is something like a sponge, but made of various rock materials with variously-sized open spaces. The water surface and flow patterns within aquifer material are not visible from the surface, and groundwater reservoirs take much longer to fill and extract water from than a surface water reservoir.

Aquifers can be either unconfined or confined (under pressure). Unconfined aquifers are open to the atmosphere and are bounded at the top by the water table, which forms the transition between the unsaturated and saturated zones. Confined aquifers are typically found beneath unconfined aquifers and are separated by low permeability silt or clay confining layers (or aquitards).

Back to top

Surface Water and Groundwater Interaction

Figure 4: (A) Gaining streams receive water from the groundwater system. (B) Losing streams lose or add water to the groundwater system. (C) Disconnected streams are separated from the groundwater system by an unsaturated zone.
Figure 4: (A) Gaining streams receive water from the groundwater system. (B) Losing streams lose or add water to the groundwater system. (C) Disconnected streams are separated from the groundwater system by an unsaturated zone.

Surface water is commonly connected to groundwater, but the relationship is difficult to observe and measure. The relationship between surface water and groundwater depends on the amount of water available in the stream and in local aquifers, as well as the subsurface geology. Under natural hydrologic conditions, some streams gain flow from groundwater (Figure 4-A, right) and other streams lose flow to groundwater (Figures 4-B and C, right). Thus, in some areas (gaining streams) groundwater aquifers can help support streamflow during dry weather conditions and in other areas (losing streams) surface water bodies are important sources of recharge to groundwater aquifers. Streams can also shift between gaining and losing flow along their courses and over time when the hydrology, underlying geology, local climate, or streamflow conditions change.

Back to top

Groundwater Recharge

Natural recharge generally occurs in permeable soils, sediments and fractured bedrock during periods when precipitation exceeds evapotranspiration or when streams are flowing. When rain falls faster than it can soak into the ground, runoff occurs and limits the amount of water that is recharged. Other factors that can limit recharge include the presence of hard surfaces, such as roads and driveways, the presence of shallow clay layers, and areas with a shallow water table. In many areas of California, stream channels typically provide a significant source of recharge to groundwater basins. The identification and protection of groundwater recharge areas is an important step in sustaining groundwater basins.

Seepage from canals, surface reservoirs, septic and leaking water supply systems, urban watering and storm runoff also contribute to recharge. Recharge can also result from irrigating crops. When applying more irrigation water than a crop can absorb or water can evaporate, the excess sinks through the root zone and gradually recharges groundwater.

Recharge can be enhanced by placing water in spreading basins to percolate into the ground, modifying stream channels and surface topography to slow the rate of runoff and increase infiltration of stormwater, and inserting water into recharge wells.

Back to top

Groundwater Discharge

The speed and manner of groundwater movement from recharge areas to discharge areas where it exits the aquifer (Figure 5), depend on the permeability of the various materials (sediments, soils, rocks) that the water must flow through, the hydraulic gradient of the water moving underground, hydraulic conductivity of the geologic formation, and the cross-sectional area of the aquifer (if the aquifer is a hallway, a door frame in the hallway is the cross-sectional area).

Figure 5: The figure illustrates groundwater system recharge and discharge areas and estimates time for a water molecule to flow along various paths from recharge to discharge areas.
Figure 5: The figure illustrates groundwater system recharge and discharge areas and estimates time for a water molecule to flow along various paths from recharge to discharge areas.

Most natural discharge occurs at springs, seepage into stream channels, wetlands and seasonal lakes in desert areas. In some basins, subsurface flow into another basin or into the ocean discharges significant amounts of groundwater. Humans can also significantly contribute to discharge by pumping groundwater from water wells.

Wetlands or lakes can form when the water table lies close to or at the ground surface. The wetland may disappear if groundwater levels are lowered. Water evaporates from damp soil marginal to the wetland and is removed by the roots of plants.

Back to top

Wells and How They Work

Water wells can be thought of as windows to the aquifer and provide the only opportunity to collect direct information on the groundwater system. Water wells are typically quite expensive to install. Therefore, collecting high quality information during water well drilling, constructing and testing is important.

Figure 6: Water well construction diagram for sand or gravel, known as unconsolidated material and bedrock completion.
Figure 6: Water well construction diagram for sand or gravel, known as unconsolidated material and bedrock completion.

A well is a hole drilled below the ground surface into the saturated zone (Figure 6). Wells typically have screens at intervals to allow groundwater to flow into the well from the most productive aquifer(s). All water wells are required to prevent foreign substances from entering the well and the aquifer. This is called surface completion and consists of installing casing and sanitary seals. The casing also keeps the material of the aquifer from falling into the well and provides space for a pump and a filter pack. Well casing typically consists of steel pipe, but can also consist of plastic pipe (e.g., PVC) for some applications. The most common pumps used in wells today are line-shaft turbines and submersible turbine pumps. A well also could be an “open hole” completion below the sanitary seal and casing as in many bedrock wells. A well that is built correctly and is properly developed will not impede the flow of groundwater from the aquifer into the well or allow sediment from the aquifer to enter the well.

Until the well pump is turned on, the groundwater level in the well will be that of the local water table for an unconfined aquifer or the potentiometric surface in a confined aquifer. When the pump is turned on, the groundwater inside the casing is pumped to the surface, and the water level within the casing is lowered. The difference in pressure between the water level in the casing and the water level in the aquifer creates a hydraulic gradient between the aquifer and the casing. As a result, groundwater flows from the aquifer into the casing to replace the water that is being removed.

The rate at which groundwater flows from the geologic formation into the well is determined by the permeability and storage capacity of the aquifer material and efficiency of the well during pumping (affected by well design and construction).

Back to top

What Is Sustainable Management?

The Sustainable Groundwater Management Act defines sustainable management as

“Management and use of groundwater in a manner that can be maintained during the planning and implementation horizon without causing undesirable results.”

Undesirable results include…
      • Chronic lowering of groundwater levels indicating significant and unreasonable depletion
      • Reductions in groundwater storage
      • Seawater intrusion
      • Degraded water quality
      • Land subsidence
      • Surface water depletion that adversely impacts beneficial users

 

Click below to download the Groundwater Primer for additional groundwater information.

 

Back to top